Küppersbusch IGV6504.0 Uživatelský manuál

User manualDishwasherIGV6504.0

The cutlery basketPut the forks and spoons with the handlesdown.Put the knives with the handles up.Mix the spoons with other cutlery to preventthem to

3. Put the basket in the upper position.4. Put back the front runner stops (A) intheir initial position.Caution! If the basket is in the upperposition

Programme Type of soil Type of load Programme descriptionNormal soil Crockery and cutlery PrewashWash 65 °CRinsesDry1)Fresh soil Crockery and cutlery

ABCABC1. To unlock the filter system, turn thehandle on the microfilter (B) approxi-mately 1/4 counterclockwise.2. Remove the filter system.3. Hold th

Malfunction Fault code Possible cause Possible solution The filter in the water in-let hose is blocked.Clean the filter. The connection of thewa

Problem Possible cause Possible solution The spray arms could not turnfreely because of incorrect ar-rangement of the load.Make sure that an incorrec

Environment concernsThe symbol on the product or on itspackaging indicates that this product maynot be treated as household waste. Insteadit should

17

18

19

ContentsSafety information 2Product description 4Control panel 5Use of the appliance 6Setting the water softener 7Use of dishwasher salt 8

156954880-A-142011

• Make sure that the spray arms can movefreely before you start a washing pro-gramme.• The appliance can release hot steam ifyou open the door while a

• Make sure that the electrical informationon the rating plate agrees with the powersupply.• Always use a correctly installed shock-proof socket.• Do

3 Salt container4 Detergent dispenser5 Rinse aid dispenser6 Rating plate7 Filters8 Lower spray arm9 Upper spray armControl panel45321BA1 On/off button

Half-load buttonUse this function when it is necessary tostart a washing programme with a smallload.The half-load function decreases the pro-gramme ti

6. Fill the detergent dispenser with thecorrect quantity of detergent.7. Start the washing programme.Setting the water softenerThe water softener remo

6. Switch off the appliance to keep theoperation.If the water softener is set electronicallyto the level 1, the salt indicator lightstays off.Use of d

2.Fill the rinse aid dispenser 5 with rinseaid. The mark 'max' shows the maxi-mum level.3. Remove the spilled rinse aid with anabsorbent clo